Ultimate9 LED Work Lamp: Flush Mount

$89.95
AUD
In stock
MPN
ULTLEDWL020

Brilliant performance projected in a driving beam pattern.

Features:

• Driving Beam Pattern
• 6 x Osram Grade A 5W LED Chips
• Ingress Protection Rating of IP68/IP69K
• GE Lexan® Polycarbonate Lens
• Military Grade Breather
• DuPont® Coated, Die Cast Aluminium Housing

Have any questions? (03) 9729 8515
Ultimate9 LED Work Lamp: Flush Mount
$89.95
AUD

Details

For a clean and factory looking build, it's hard to look past flush mount lights - enter the Ultimate9 Work Lamp: Flush Mount.

With x6 Osram 5W LED chips, a driving pattern reflector, and a Lexan® Polycarbonate lens - the Flush Work Light will cast a clean beam of light, reaching 1 Lux at 89m. Paired well with bull bars & nudge bars to uncover terrain immediately approaching while keeping a tidy finish.

Tested to meet the highest waterproof ratings, a 6063 grade aluminium housing and military grade breather allow wider & greater heat dissipation - improving longevity.

 

Features:
  • Water & Dust Protection: Tested to the highest IP ratings, IP68 and IP69K.
    IP68 for term-long submersion and total dust ingress.
    IP69K for stream jet cleaning.
  • Ventilation: Military grade breather valve equalises internal pressure to prevent seal failure, moisture and dust ingress as the aluminium housing heats and cools - eliminating condensation & fogging.
  • Housing: Die-cast 6063 aluminium housing with 304 Stainless Steel fastener. Overlaid with a UV & corrosion resistant Dupont® coating.
  • Lens: GE Lexan® Polycarbonate lenses are virtually indestructible, UV, scratch and impact-resistant; they negate the need for additional protective covers.
  • Optics: Driving Beam Pattern.
  • Technology: 6x Grade A Osram 5W LED chips & sealed DT connectors.

 

What Harness Do I Need?

Ultimate9 Work Lamps come supplied with their own individual harness. However, when installing two Work Lamps, our Twin Output Harnesses can be utilised - see link below.

Twin Output Harness

 

Kit Includes:

• Work Lamp: Flush Mount
• 304 Stainless Steel fasteners
• Rubber Gasket
• Wiring Harness: 2.5m Relay ~ DT connector | 1.3m Relay ~ Light Switch | 1.3m Relay ~ Power Terminals

 

Specifications:
  • Input Power: 9-36V
  • Beam Pattern: Driving
  • Power: 30W
  • Current Draw: 1.5A @ 13.2V
  • Effective Lumen: 1,396 lm
  • Beam @ 1 Lux: 89m
  • LED Chips: Osram 5W
  • Colour Temp: 6000-6500K
  • Housing Material: Die Cast 6063 Aluminium
  • Housing Coating: DuPont®
  • Lens Material: GE Lexan® Polycarbonate
  • IP Rating: IP68 / IP69K
  • Ventilation: Military Grade
  • Weight: 0.9Kg, Loom - 0.25Kg
  • Body Dimensions: (L)123 x (H)92 x (W)83mm
  • Lens Dimensions: 2" x 2" (50 x 50mm)
  • Connector Type: DT Sealed
  • Operating Temp: -40ºC - 145ºC
  • Certification: CE, RoHS, RCM

 

 

 

 

 

 

 

 

Input Power: 9-36V
Beam Pattern: Driving
Power: 30W
Current Draw: 1.5A @ 13.2V
Effective Lumen: 1,396 lm
Beam @ 1 Lux: 89m
LED Chips: Osram 5W
Colour Temp: 6000-6500K
Housing Material: Die Cast 6063 Aluminium
Housing Coating: DuPont®
Lens Material: GE Lexan® Polycarbonate
IP Rating: IP68 / IP69K
Ventilation: Military Grade
Weight: 0.9Kg, Loom - 0.25Kg
Body Dimensions: (L)123 x (H)92 x (W)83mm
Lens Dimensions: 2" x 2" (50 x 50mm)
Connector Type: DT Sealed
Operating Temp: -40ºC - 145ºC
Certification: CE, RoHS, RCM

Work Lamps:
Ultimate9 Work Lamps come supplied with their own individual harness. However, when installing two Work Lamps, our Twin Output Harnesses can be utilised.

Twin Output Harness

 

 

 

 

 

 

 

 

 

 

 

 

Reviews

Write Your Own Review
You're reviewing:Ultimate9 LED Work Lamp: Flush Mount
Your Rating
Back to top